Do you have existing molds that run on an Autocast mount rail machine? CMH can adapt our time proven #6H to run these molds with more stroke and ejection clearance than the original Autocast machines. See #6H, traditional tilting machines, for machine specifications.
Replacement mount rails and spacers
* Mold mount rails and keys are designed for mounting permanent molds in
- 30 x 30in (762 x 762mm)
- 36 x 36in (914.5 x 914.5mm)
- 42 x 42in (1066.8 x 1066.8mm)
- 48 x 60in (1219.2 x 1524mm)
tiltpour casting machines.
Specifications
Key Mount Rail
Product Number |
A |
B |
Unit Weight |
KEY-30 |
29 7/8in (75.88cm) |
3/8in (0.95cm) |
1.3lbs (0.58kg) |
KEY-40 |
39 7/8in (101.28cm) |
3/8in (0.95cm) |
1.7lbs (0.77kg) |
Top Rail
|
* Rails are ground and machined on all surfaces. |
Product Number |
A |
B |
Unit Weight |
KEY-30 |
29 7/8in (75.88cm) |
4.0in (10.1cm) |
48lbs (21.7kg) |
KEY-40 |
39 7/8in (101.28cm) |
4.0in (10.1cm) |
64lbs (29kg) |
Spacer Mount Rail
Product Number |
A |
B |
Unit Weight |
SPACER-30 |
29 7/8in (75.88cm) |
3.0in (7.62cm) |
24lbs (10.8kg) |
SPACER-40 |
39 7/8in (101.28cm) |
3.0 (7.62cm) |
32lbs (14.5kg) |
Bottom Rail
Product Number |
A |
B |
Unit Weight |
BRAIL-30 |
29 7/8in (75.88cm) |
3.0in (7.62cm) |
54lbs (24.5kg) |
BRAIL-40 |
39 7/8in (101.28cm) |
3.0in (7.62cm) |
74lbs (33.5kg) |